Description
One Ball Jay Brass/Nylon Brush Combo
Use this brass/nylon brush combination from OBJ after every hot wax to keep you cruising down the hill. Lightly use prior to waxing to clean up your base and brush off excess wax after you're done to give it some structure.
Size: 3" x 5"
Instructions from One Ball Jay
1. Select correct temperature specific wax by checking mountain conditions/snow report…(actual snow temperature, not air).
2. Press wax on the iron and distribute small drips of wax over the entire base. DO NOT ALLOW IRON TO SMOKE!
3. With iron in hand, slowly pull the iron over the wax drips smoothing them into a sheet of wax that covers the entire base tip to tail.
4. Let the wax cool 10-15 minutes, then scrape with a sharp plastic scraper. DO NOT USE a steel scraper.
5. Use a wax brush or fiber pad, remove excess wax from base, brushing from tip to the tail. This allows your base to glide fast.
